_edited.jpg)
POWER PRESS
Kwality mechanical Power Press Comes both Pillar Type & "C" Type frame versions from 20 tons to 200 tons capacity. Kwality power presses are the most economical type of presses and come with several standard/optional features.
​
Frame: Frame is fabricated from high quality Rolled steel plates. Proper alignment of the frame of the power press is ensured for quality machining.
​
Clutch: Kwality power press comes both in mechanical & pneumatic clutches. The clutch is rigid and gives continuous stroke for mass production.
​
Crank Shaft: It is made of special alloy steel fitted in bronze bushes for smooth working, longer life, and accuracy.
​
Flywheel: Made of high grade cast iron, for storing and releasing adequate energy for the pressing operation, and properly balanced for smooth running.
_p.png)
_p.png)
_p.png)
C-TYPE
Power Press
Standard Accessories
-
Belt Guard
-
Gear Guard
-
Bolster Plate Machined T Slots
Optional Accessories
-
Suitable Motor
-
V Belts
-
Push Button Starter
Description | 5 TON | 10 TON | 20 TON | 30 TON | 50 TON | 75 TON | 100 TON | 150 TON | 200 TON |
|---|---|---|---|---|---|---|---|---|---|
Bed to Ram Bottom | 210 | 235 | 260 | 270 | 365 | 380 | 475 | 550 | 550 |
Bed | 265*380 | 300*400 | 350*500 | 400*600 | 475*675 | 525*750 | 600*775 | 720*980 | 900*1100 |
Stroke | 40 | 55 | 65 | 75 | 100 | 125 | 125 | 150 | 170 |
Crank Shaft Dia | 70 | 75 | 80 | 90 | 100 | 125 | 150 | 170 | 205 |
Hole in RAM for die clamping | 22 | 25 | 30 | 35 | 40 | 45 | 45 | 50 | 60 |
Power Required | 1 | 2 | 2 | 3 | 5 | 5 | 7.5 | 10 | 15 |
No. of Strokes per min * | 70 | 65 | 60 | 50 | 45 | 40 | 35 | 30 | 30 |
H-TYPE
Power Press
Standard Accessories
-
Belt Guard
-
Gear Guard
-
Bolster Plate Machined T Slots
Optional Accessories
-
Suitable Motor
-
V Belts
-
Push Button Starter
Description | 5 TON | 10 TON | 20 TON | 30 TON | 50 TON | 75 TON | 100 TON | 150 TON | 200 TON |
|---|---|---|---|---|---|---|---|---|---|
Bed to Ram Bottom | 210 | 235 | 260 | 270 | 365 | 380 | 475 | 550 | 550 |
Bed | 265*380 | 300*400 | 350*500 | 400*600 | 475*675 | 525*750 | 600*775 | 720*980 | 900*1100 |
Stroke | 40 | 55 | 65 | 75 | 100 | 125 | 125 | 150 | 170 |
Crank Shaft Dia | 70 | 75 | 80 | 90 | 100 | 125 | 150 | 170 | 205 |
Hole in RAM for die clamping | 22 | 25 | 30 | 35 | 40 | 45 | 45 | 50 | 60 |
Power Required | 1 | 2 | 2 | 3 | 5 | 5 | 7.5 | 10 | 15 |
No. of Strokes per min * | 70 | 65 | 60 | 50 | 45 | 40 | 35 | 30 | 30 |
_p.png)